Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
- Brake system
+ Brakes
+ Brake highway/hose the brake cylinder
+ Forward brakes
- Lay and back brake
+ The general description
- Diagnostics
Check and adjustment
Vehicle service
Cable of a lay brake
Brake drum
Brake колодка
The brake cylinder
Back plate of a brake
+ Antiblocking brake system (ABS)
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
The brake cylinder
Removal
|
|
- Execute item 1 - 6 procedures of removal Has undressed the Brake drum.
- Execute item 2 - 4 procedures of removal of Section Brake колодка.
- Release накидную a nut of a brake highway (or nuts) but only so that the liquid did not follow.
|
|
- Remove adjusting boats of the wheel cylinder. Disconnect a brake highway (or highways) from the wheel cylinder and establish a cap of a stopper of a safety valve of the wheel cylinder (1) in a highway not to allow a liquid to pour out.
|
|
|
Survey
|
|
Examine the wheel cylinder, whether there are no wear tracks, cracks, corrosion or damages. |
|
|
Clear components of the wheel cylinder of a brake liquid. |
Installation (for not soldered type)
|
|
|
|
- Remove a cap of a stopper of a safety valve from a brake highway and connect a highway (or highways) to the wheel cylinder (1) so that the liquid did not proceed.
|
|
|
- Tighten the wheel cylinder on a back plate of a brake (1) according to an inhaling twisting moment. An inhaling twisting moment: a bolt of the wheel cylinder (a): 13 Н•м (1.3 kg th, 9.5 pounds-foots).
|
- The inhaling twisting moment накидной nuts (2) (or nuts) a brake highway (3) which has been connected in item 1 above, should correspond to the specification. An inhaling twisting moment: накидная a nut of a brake highway (b) — 16 Н•м (1.6 kg th, 12.0 pounds-foots).
- Establish a cap of a stopper of the safety valve, removed from a highway, back on a cap of a stopper of a safety valve.
- Then address to item 1 - 6 procedures of installation of Section Brake колодка.
|
|
|
|