Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      The general description
      + Diagnostics
      - Service out of a workshop
         The shock-absorber
         Cylindrical spring
         The bottom draught
         The top draught
         Lateral draught
         The back bridge and the wheel bearing
         Internal oil epiploon of the back bridge
         The case of the back bridge
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment




The top draught

Removal

 PERFORMANCE ORDER

  1. Lift the car and remove a back wheel.
  1. If there is a system of antiblocking of brakes ABS, disconnect the plug of a wire of the gauge of speed of a wheel (1) from the left top draught (2).
  1. Remove the top draught (1).
1 — the top draught
2 — a bolt

Installation

 PERFORMANCE ORDER

  1. Establish the top draught (3) on a frame of the chassis and the bridge case; the direction of bolts at installation is shown in drawing more low. A nut do not tighten.
  2. In drawing direction definition at installation for the left top draught (3) at the car with system of antiblocking of brakes ABS is shown.
  3. Attach the plug of a wire of the gauge of speed of a wheel (4) to the top draught (3) (if there is a system of antiblocking of brakes ABS).
1 — a forward bolt of the top draught
2 — a nut
3 — the left top draught
5 — a back bolt of the top draught
6 — a washer
7 — the body centre
8 — the forward party
  1. Lower the lift and in not loaded condition of the car tighten a forward bolt and a back nut of the top draught to the specified value of the moment of an inhaling.
    • The inhaling moment:
      • Forward bolt of the top draught (a): 95 Н•м (9.5 kg th, 69 pounds-foots)
      • Back bolt of the top draught (b): 90 Н•м (9.0 kg th, 65 pounds-foots)