Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
- Suspension bracket
   + Forward suspension bracket
   - Back suspension bracket
      The general description
      + Diagnostics
      - Service out of a workshop
         The shock-absorber
         Cylindrical spring
         The bottom draught
         The top draught
         Lateral draught
         The back bridge and the wheel bearing
         Internal oil epiploon of the back bridge
         The case of the back bridge
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment



The bottom draught

Removal

 PERFORMANCE ORDER

  1. Lift the car and remove a back wheel.
  1. Jack (2) prop up the case of the back bridge (1).
  1. Remove a forward fixing bolt (2) bottom draughts (1).
  1. Remove a back fixing bolt (2) bottom draughts (1).

Installation

 PERFORMANCE ORDER

  1. Establish the bottom draught (1) on a frame of the chassis (4) and the case of the bridge (5); the correct direction of bolts at installation is shown in drawing. A nut do not tighten.
  2. Clean a jack from under the case of the back bridge (5).
  3. Establish a wheel and tighten nuts of a wheel to the specified value of the moment of an inhaling. The inhaling moment: wheel nuts — 100 Н•м (10.0 kg th, 72.5 pounds-foots).
  4. Lower the lift and in not loaded condition of the car tighten a forward bolt (2) and a back nut (3) bottom draughts (1) to the specified value of the moment of an inhaling.
    • The inhaling moment:
      • Forward bolt of the bottom draught (a): 100 Н•м (10.0 kg th, 72.5 pounds-foots)
      • Back bolt of the bottom draught (b): 90 Н•м (9.0 kg th, 65.0 pounds-foots)

A — the body Party
B — the Side of the bridge
1 — the bottom draught
2 — a forward bolt
3 — back a nut
4 — a chassis frame
5 — cases of the back bridge
6 — the body centre
7 — a body outer side