Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
- Steering
   + Suspension bracket, wheels and tyres
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + System of the hydraulic booster of a wheel
   - Steering wheel and steering column
      + Steering wheel and steering column the safety not equipped with a pillow
      - Steering wheel and steering column with a safety pillow
         The general description
         + Diagnostics
         - Service out of a workshop
            + Safety measures at service
            The module (having inflated) pillows of the driver
            + Steering wheel
            The contact coil and подрулевые switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            The steering lock (the ignition switch)
            The bottom shaft of a steering
            Check of a steering column and the top shaft of a steering on presence of damages at failure (at not a cabriolet)
            Check of a steering column on damages at failure (at a cabriolet)
            The lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         The special tool
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment




Steering column (at a cabriolet)

When the steering column is removed from the car, it is very easy for damaging.

If it to drop vertically, the steering shaft can break or can ослабнуть plastic pins which regulate length of a column; if against it to lean, it can be bent or deformed. Any of the listed damages can worsen ударопоглощающие properties of a column.

Weakening fixing bolts and nuts of a steering column, be convinced that the steering column and the bottom steering shaft are separated. If before easing of fixing bolts and nuts a steering column and the bottom steering shaft not to separate, it can damage the bearing of the bottom steering shaft.


At carrying out of service of a steering column or any knots established on it it is necessary to remove a steering wheel. But if the steering column acts in film to provide only access to components of the panel of tools, the steering wheel can to be removed from a column.

Removal

Never put a column vertically on a steering wheel turned downwards by the module (надува) of a pillow of safety. It can lead to a trauma.


 PERFORMANCE ORDER

  1. Disconnect "minus" a battery cable.
  2. Disconnect system of a pillow of safety. Preventions in the beginning of the given Chapter see.
  3. Remove a steering wheel and the contact coil with подрулевыми switches if it is required. See in the given Chapter Has undressed the Steering wheel and the Contact coil and подрулевые switches.
  4. If a steering wheel and-or подрулевые switches remain on a place, execute following manipulations:
    • Turn a steering wheel so that forward wheels of the car have been directed directly forward.
    • Turn the ignition switch in position “LOCK” and take out a key.
  5. Uncover apertures of a steering column (1).
  6. Disconnect all cables of following knots:
    • The contact coil and подрулевых switches.
    • The ignition switch.
1 — a cover of an aperture of a steering column
  1. Put стыковочные labels on муфту a shaft and a shaft (from outside columns) that on them correctly to establish into place.
1 — a steering column
2 — муфта a steering shaft
3 — labels
  1. Having unscrewed a bolt from outside columns on муфте a shaft and having weakened a bolt from outside the bottom shaft, pull муфту a shaft towards the bottom shaft (as shown arrows in drawing more low).
1 — a steering column
2 — муфта a steering shaft
3 — the bottom steering shaft
4 — a bolt (from outside columns)
5 — a bolt (from outside the bottom shaft)
  1. Unscrew fixing bolts of a steering column (6 pieces).
1 — a steering column
2 — a fixing bolt of a steering column
3 — the bottom epiploon of a steering column
  1. If there is a cable of blocking of the switch (key), unscrew, and then disconnect a cable from the ignition switch.
  2. Remove a steering column from the car.
1 — a cable of blocking of the switch (key)
2 — a bolt

Survey

Check up serviceability of a steering column and presence of damages as it is described in Section Check of a steering column on damages at failure (at a cabriolet).

Installation

After fixing bolts of a steering column are tightened, tighten bolts муфты a steering shaft.


 PERFORMANCE ORDER

  1. Be convinced that forward wheels and a steering wheel are in the position corresponding to rectilinear movement of the car.
  2. If there is a cable of blocking of the switch (key), fix it on the ignition switch. The inhaling moment: a bolt of a cable of blocking of the switch (key) (a): 2.2 Н•м (0.22 kg th, 1.6 pounds-foots).
1 — a cable of blocking of the switch (key)
2 — a bolt
  1. Establish a steering column (1) on the panel (4) and the top fixture so that the thickening of the bottom epiploon of a steering column (3) was projected through an aperture in the panel in an engine compartment. Tighten at first the bottom bolts of a steering column (2) (4 pieces), and then the top bolts (5) (2 pieces) to the specified value of the moment of an inhaling. The inhaling moment: a fixing bolt of a steering column — 23 Н•м (2.3 kg th, 17.0 pounds-foots).
In an engine compartment.
In salon.
  1. Dress муфту a steering shaft on a steering shaft, having combined the labels put before removal.
1 — муфта a steering shaft
2 — a steering shaft (from outside columns)
3 — labels
  1. Fasten a bolt муфты a shaft (from outside columns) to муфте a steering shaft. At first tighten a bolt муфты a shaft (from outside columns) to the specified value of the moment of an inhaling, and then a bolt муфты a shaft (from the bottom party of a shaft) to the specified value of the moment of an inhaling. The inhaling moment: a bolt муфты a shaft (): 25 Н•м (2.5 kg th, 18.0 pounds-foots).
1 — муфта a steering shaft
2 — a steering shaft (from outside columns)
3 — labels
  1. If have been removed the contact coil and подрулевые switches, establish them into place. The Section the Contact coil and подрулевые switches see in the given Chapter.
  2. Connect all wires which have been disconnected before removal.
  3. Establish a cover of an aperture of a steering column.
1 — a cover of an aperture of a steering column
  1. If the steering wheel has been removed, establish it as the Steering wheel is described in the given Chapter in Section.
  2. Connect "minus" a battery cable.
  3. Having established a steering column, be convinced that the system of a pillow of safety is included. Preventions in the beginning of the given Chapter see.