Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
- Start system
+ The general description
- Diagnostics
Block repair
Analysis
Assemblage
Survey
Work check
Specifications
Type 0.9 кВ
Necessary materials
The special tool
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment
|
Survey
The piston
|
|
Check up the piston on deterioration. Replace, if it is necessary. |
The electromagnetic switch
|
|
Insert the piston and release. The piston should return to initial position quickly. Replace it if it is necessary. |
Check of a chain of the involving coil
|
|
Check up electroconductivity of conclusions ' S ' and ' M ' the electromagnetic switch. If there is no electroconductivity, the coil is opened also it it is necessary to replace. |
Check of a chain of the keeping coil
|
|
Check up electroconductivity of a conclusion ' S ' the electromagnetic switch and the coil case. If there is no electroconductivity, the coil is opened also it it is necessary to replace. |
Sleeve of a shaft of an anchor
|
|
Check up a sleeve on deterioration or damages. Replace, if it is necessary. |
Brush
|
|
- Check up brushes on deterioration.
|
|
- Measure length of a brush and if it below a limit, replace a brush.
|
Length of a brush
|
|
Types 0.9 кВ and 1.2 кВ
|
Type 1.4 кВ
|
|
The standard
|
12.3 mm (0.44 inches)
|
16.5 mm (0.65 inches)
|
|
Limit
|
7 mm (0.28 inches)
|
- Establish brushes on щеткодержатель and check up, whether smooth movement.
|
|
Spring
|
|
Check up springs of brushes on deterioration, damage or other malfunctions. Replace, if it is necessary. |
Tension of a spring of a brush
|
The standard
|
1.9 — 2.5 kg (3.97 pounds)
|
|
Limit
|
0.6 kg (1.32 pounds)
|
Щеткодержатель
|
|
|
|
- Check up brush movement in щеткодержателе. If the brush in щеткодержателе jams, believe, whether it is bent щеткодержатель and whether sliding surfaces are soiled. Clear or correct, if it is necessary.
|
- Check up electroconductivity between a positive conclusion of a brush and earthed щеткодержателем. If there is an electroconductivity, щеткодержатель is earthed
It is earthed because of defect of isolation and should be replaced.
|
|
Anchor
|
|
|
|
- Check up a collector, whether there is no dirt and a deposit. Correct by means of an emery paper or a lathe if it is necessary.
|
- Check up, in regular intervals or the collector is worn out, having fixed an anchor on V-shaped blocks. If the deviation of an arrow of the indicator exceeds a limit, repair or replace.
|
|
The specification assumes more low that an anchor will not drive. It is necessary to replace a pognutyj anchor. |
- Collector not the round
- The standard: 0.05 mm (0.002 inches) or less
- Limit: 0.4 mm (0.015 inches)
|
|
1 — an anchor
2 — the V-block
3 — a magnetic rack
4 — стрелочный the indicator |
|
|
- Check up a collector on deterioration. If diameter of less limiting, replace an anchor.
- External diameter of a collector:
- The standard: 29.4 mm (1.16 inches)
- Limit: 28.8 mm (1.13 inches)
|
- Check up depth of isolation of a collector. Correct or replace, if it less limiting.
- Depth of isolation of a collector "a":
- The standard: 0.4 - 0.6 mm (0.015 - 0.023 inches)
- Limit: 0.2 mm (0.008 inches)
|
|
1 — a collector segment
2 — an insulator |
|
|
Grounding check
|
|
Check up a collector and the anchor core. If there is an electroconductivity, the anchor is earthed also it it is necessary to replace. |
Chain check
|
|
Check up electroconductivity between segments. If there is no electroconductivity in any checked points, the chain is opened, and it is necessary to replace an anchor. |
Transfers
|
|
Check up internal and planetary transfers on deterioration, damage or other malfunctions. Replace, if it is necessary. |
Gear and обгонная муфта
|
|
- Check up a gear on deterioration, damage or other damages.
|
|
- Check up that муфта it is stopped, if it to turn in a drive direction, and smoothly rotates in the opposite direction. Replace, if it is necessary.
|
- Check up a shaft teeth on deterioration or damage. Replace, if it is necessary.
|
|
- Check up smoothness of movement of a gear.
|
|
|
Sleeve of a forward casing
|
|
Check up a sleeve on deterioration or damage. Replace, if it is necessary. |
|
|