Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
- Steering
   + Suspension bracket, wheels and tyres
   + Adjustment of corners of installation of wheels of a forward suspension bracket
   + System of the hydraulic booster of a wheel
   - Steering wheel and steering column
      - Steering wheel and steering column the safety not equipped with a pillow
         The general description
         + Diagnostics
         - Service out of a workshop
            Steering wheel
            Podrulevye switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            The steering lock (the ignition switch)
            The bottom shaft of a steering
            Check of a steering column on presence of damages at failure (at a cabriolet)
            Check of a steering column and the top shaft of a steering on presence of damages at failure (at not "cabriolet")
            The lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         The special tool
      + Steering wheel and steering column with a safety pillow
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment




The steering lock (the ignition switch)

Removal

 PERFORMANCE ORDER

  1. Remove a steering column (1). Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet) See in the given Chapter.
Not a cabriolet.
Cabriolet.
  1. With the help центрового the puncher (1), ослабьте also remove fixing bolts (2) steering locks.

Be cautious not to damage the puncher aluminium parts of the steering lock.

  1. Turn the ignition key in position “ACC” or “ON” and remove the steering lock from a steering column.

Installation

 PERFORMANCE ORDER

  1. Arrange an oblong aperture of a steering shaft (2) in the middle of an aperture in a column.
1 — a steering column
  1. Turn the ignition key in position “ACC” or “ON” and will put the steering lock on a column
  2. Now turn the ignition key in position “LOCK” and take out from the lock.
  3. Combine the plug of the lock with an oblong aperture of a steering shaft and повращайте a shaft to be convinced that it is blocked.
  1. Tighten new bolts until at them heads will not be broken off.
  1. Turn the ignition key in position “ACC” or “ON” and check up that the steering shaft rotates smoothly. Also check up lock work.
  2. Establish a steering column as it is described in the given Chapter in Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet).