Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
- Coupling
   The general description
   Diagnostics
   - Service out of a workshop
      Liquid check
      Height of a pedal of coupling
      Free wheeling of a pedal of coupling
      Tube and hose of a liquid for coupling
      The main cylinder of coupling
      The cylinder of work of coupling
   + Module repair
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment




The cylinder of work of coupling

Removal

Do not suppose liquid hit on the painted surfaces.


 PERFORMANCE ORDER

  1. Clear round a cover of the tank and choose from it a liquid a syringe or something similar.
  2. Disconnect a hose for a liquid (2) from the working cylinder of coupling (1).
  3. Remove fixing bolts of the working cylinder (4) and the working cylinder of coupling (1).
1 — the coupling cylinder
2 — a hose for a liquid
3 — the E-shaped ring
4 — bolts of the working cylinder

Installation

 PERFORMANCE ORDER

  1. To pit air only from the main cylinder, it is necessary for removing from the car. Procedure of removal and installation of the main cylinder and стравливания air is described in the given Chapter in Section the Main cylinder of coupling.
  1. Put a greasing small amount on a top of a bar (3) working cylinders of coupling (1). “A”: greasing 99000-25010.

Do not suppose hit of any greasing on a casing (2).


  1. Establish the working cylinder of coupling (1) and tighten fixing bolts (2) to the specified value of the moment of an inhaling. The inhaling moment (a): 50 Н•м (5.0 kg th, 36.5 pounds-foots).
  1. Attach a hose for a liquid of coupling (3) and tighten a connecting bolt (4) to the specified value of the moment of an inhaling. The inhaling moment (b): 23 Н•м (2.3 kg th, 16.5 pounds-foots).
  2. Fill in in the tank the specified brake liquid and check up, whether there is no leak.
  3. Pit air from system and check up a free wheeling of a pedal of coupling. Стравливание air it is described in the Head Brake system.
1 — the working cylinder of coupling