Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation

Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
- Ignition system
   - System of ignition for engine G16
      + The general description
      + Diagnostics
      - Vehicle service
         Check of a spark of ignition
         Check of time of an advancing of ignition
         High voltage wire
         Assemblage of the coil of ignition (an igniter and the ignition coil)
         Spark plug
         The resistor an ignition advancing (if it is established)
         CMP-sensor control
      The specification, inhaling twisting moment
      The special tool
   + System of ignition for engine J20
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment

High voltage wire



  1. Remove a wire of a high voltage (2) from the coil of ignition (1), keeping its cap.
  1. Extend a wire of a high voltage (2) of a spark plug, keeping its cap.
  • Removal of wires of a high voltage together with clips can damage wires inside (a wire of high resistance).
  • For the same reason, disconnect wires, keeping for a cap.



  1. Measure resistance of a wire of a high voltage, using an ohmmeter. Resistance of a wire of a high voltage: 4-10 to / m (1.2 - 3.0 to / foot).
  1. Check up, whether there is no for damages, a permission and corrosion of conclusions. If result of check unsatisfactory, replace a wire () a high voltage.


Establish a wire of a high voltage (2) on a spark plug and the coil of ignition (1), keeping its cap.

  • Never use a metal conductor of a high voltage for replacement.
  • Completely insert caps when establish high voltage wires.