Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
- Wheels and tyres
   + The general description
   + Diagnostics
   + Servicing and small adjustment
   - Service out of a workshop
      Wheel
      + The tyre
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment




Service out of a workshop

Wheel

Removal

 PERFORMANCE ORDER

  1. Loosen the wheel nuts approximately on 180 (half-turn).
  1. Lift the car.
  2. Remove a wheel.

Never use heating to weaken a hard wheel as it can reduce service life of a wheel and damage wheel bearings.

Installation

Wheel nuts should be tightened in certain sequence and to the specified value of the moment of an inhaling, differently the wheel either a brake drum or a disk can be bent. The inhaling moment: a wheel nut (a) — 100 Н•м (10.0 kg th, 72.5 pounds-foots).

Before installation of wheels remove from a mounted surface of wheels and a brake drum or a disk коррозийные formations by means of a rigid wire brush. If at installation of wheels there is no good contact of metal to metal of mounted surfaces, it can cause easing of wheel nuts that further can lead слетанию wheels at car movement.