Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
- Suspension bracket
   - Forward suspension bracket
      The general description
      - Diagnostics
         The diagnostic table
         Check of the stabilizer of cross-section stability and the plug
         Check of a rack of the shock-absorber and-or cylindrical spring
         Check of the lever of a suspension bracket/hinge
         Check of the hinge of the lever of a suspension bracket
         Check of the plug of the lever of a suspension bracket
         Check of a wheel disk, nut and the bearing
      + Service out of a workshop
   + Back suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
+ Transfer
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment



Check of a wheel disk, nut and the bearing

 PERFORMANCE ORDER

  1. Check up each wheel disk on dents, deformations and cracks. It is necessary to replace strongly damaged disk.
  1. Check up, how wheel nuts are tightened, and, if necessary, tighten them to the specified value of the moment of an inhaling. The inhaling moment: wheel nuts (a): 100 Н•м (10.0 kg th, 72.5 pounds-foots).
  1. Check up deterioration of the bearing of a wheel. Having tightened a counternut to the specified value of the moment of an inhaling, put the measuring device with a dial to the centre of a nave of a wheel and measure axial люфт. A limit axial люфта the wheel bearing: 0.05 mm (0.002 inches).
  1. If results of measurement exceed a limit, replace the bearing.
  1. Повращайте a wheel to check up noise presence in the bearing and smoothness of rotation. If defect is found out, replace the bearing.